- Non-potable water tanks,
- Basements,
- Foundations,
- Bridge platforms,
- Cut-and-cover tunnels,
- Bathroom, terraces and roofs (under tile waterproofing),
- Concrete structures,
- Retaining walls,
- Gypsum and cement boards,
- Polyurethane insulation foams,
- Asphalt membranes,
- Green roofs and flower pots,
- Light roofing (metal and fibrous cement based).
SURFACE PREPARATION:
All surfaces must be free of oil, grease and moisture before the application. Clean the surface using a high pssure washer and remove oil, grease and wax contaminants, cement laitance, loose particles and mould release agents must be removed. Fill surface irregularities with the relevant product.
PRIMING:
Prime very absorbent and brittle concrete or brittle cement screed surfaces with PUAST 185 (Humidity of the concrete should not exceed %5). Or for damp concretes PUAST 2K 190 is suggested as a moisture barrier. Prime non-absorbent surfaces like metal, ceramic tiles and old coatings with PUAST 2K 190.
APPLICATION:
Firstly mix the portions (A and B) separetly by a low speed mixer for a couple of minutes. Then mix the portions in same container. The pot life of the mixture is 30-35 minutes at +20 ˚C, pot life may change depending on temperature. Apply the mixture on primed surface with a brush or a roller in minimum two layers. Second layer should be applied in min. 12 hours max. 24 hours after application of first layer.
20 Lt (A) + 20 Lt (B) 7,5 Lt (A) + 7,5 Lt (B) Sealed Pails
Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of +5 ˚C and +25 ˚C. Once opened, use as soon as possible.
Product description
Two component, bitumen extended polyurethane based, elastic cold applied liquid waterproofing membrane. It produces a highly elastic membrane with its excellent adhesion to many type of surfaces
FEATURES AND ADVANTAGE:
- Simple application,
- When applied forms seamless membrane without joints,
- It has excellent elongation properties,
- It has root resistant and it is certified for root resistant,
- Resistant to slack water and frost,
- Its low modulus gives to it excellent substrate crack-bridging properties,
- High water vapor permeability,
- It provides permanent elasticity up the -40 ˚C to +90 ˚C,
- Resistance in the cold: The film remains elastic even down to -40 ˚C,
- Resistant to chemicals,
- It is used as a joint sealant,
- Elastomeric hydrophobic based,
- Excellent mechanical properties, high elongation, tensile and tear strength, high abrasion resistance